Pull Parts
Build a list of parts that need to come off your shelves, with quantities, as a batch on the website. For example, parts going back to a vendor. The scanner sees the batch and walks your person through it: scan each part as it is pulled, print a Pulled label, and mark anything that is short or not on the shelf. It works the way picking does in PickIt, and it is tracking only. Nothing is posted to your DMS.
The Problem
- A list of parts to pull gets printed and walked by hand
- Nobody can tell how far along the pull is
- The wrong part, or too many of the right one, comes off the shelf
- Parts that were not there get scribbled on the paper, if at all
- No record of who pulled what, or when
Our Solution
- Type the parts, import a spreadsheet, or use Part List batches
- The scanner lists the parts in bin order
- A part not on the batch, or one too many, is refused
- Partial Fill and Not Found are a tap away, with a note for the manager
- Every pull is logged with who did it and when
A Pull List the Scanner Checks for You
Build a Batch Your Way
Type a part # and quantity, import a CSV or Excel file and map its Part #, Qty and Make columns, or turn Part List batches you already scanned into a pull batch. A part that turns up twice is combined into one line.
Listed in Walk Order
The scanner sorts the batch by bin, with parts that have no bin at the end. Bins come straight from your ScanIt Parts inventory, so nobody types them into the list.
Every Scan Is Checked
Scan a part that is not on the batch and the scanner says so. Try to pull more than was asked for and it tells you how many remain. A part already pulled in full is turned away.
Partial Fill and Not Found
Just like PickIt, a part you cannot pull in full is flagged on the scanner as Partial Fill or Not Found, with an optional note for the manager. The website shows those lines as Short or Not found.
A Pulled Label for Every Piece
The Pulled slip prints PULLED, the part #, the batch # and who pulled it, with the date and time. Turn on Auto-Print and one label comes out for each piece as it is pulled.
Watch It, Then Close It Out
The batch page updates every few seconds while the pull is under way, with a progress bar and an Exceptions only switch. When it is done, close it and download a packing list PDF, or export the lines to Excel or CSV.
How Pull Parts Works
Build the Batch
On the website, create a batch with a Batch # and a description, then add the parts and quantities to pull.
Open It on the Scanner
Open Pull Parts on the scanner and tap the batch. It is locked to that scanner while it is being pulled.
Pull and Scan
Scan each part as it comes off the shelf, print the Pulled label, and flag anything short or not found.
Review and Close
Complete the batch on the scanner. A manager reviews the exceptions, sends it back or closes it, and downloads the packing list.
What Pull Parts Changes
Type the parts, import a file, or use Part List batches.
With Auto-Print on, each piece pulled gets its own Pulled label.
Pull Parts is tracking only. On-hand quantities and bins in your DMS are left alone.
Use It When You Need It
Tracking Only, Your DMS Is Untouched
Pull Parts records what was pulled, by whom and when. It does not post anything to your DMS and does not change on-hand quantities or bins there. Any adjustment for the parts that leave is still made in your DMS.
A Manager Decides When It Is Done
The Pull Parts Verify permission lets a manager unlock a batch, send it back so short and not-found lines can be tried again, close it, reopen it, or delete a batch nobody has started pulling. The packing list reads VERIFIED once the batch is closed.
One Scanner Per Batch
Opening a batch locks it to that scanner, so two people never pull the same list at once. Switch Batch hands it back, and another user can pick it up later with every count kept.
Already in Your Menu
Pull Parts sits in the ScanIt Parts menu right after Parts List. Users who already had Parts List were given the Pull Parts permissions, and scanner users with Create Part List were given the scanner permission. It arrived in scanner version 130 in November 2026.
Ready to Stop Pulling Parts From a Paper List?
See how Pull Parts turns a list into a scanner batch, and shows you exactly what was pulled, what was short and what was not found.